Tile Backer Board Manufacturer

Angesen® High-Performance Tile Backer Board

The Smarter, Faster, and Stronger Substrate for Professional Wet Room Installations

Product Overview

Angesen (AGS) Waterproof Tile Backer Boards are engineered specifically for high-moisture environments. Built with a high-density Extruded Polystyrene (XPS) core and reinforced on both sides with a polymer-modified cement mortar and alkali-resistant glass fiber mesh.

It is the professional’s choice for replacing heavy cement boards and moisture-sensitive gypsum boards, providing a 100% waterproof, thermally insulated, and dimensionally stable base for any tiling project.

Features & Advantages

I. Unrivaled Bond Strength (0.5 – 1.0 MPa)

The Problem: Large format tiles (LPT) often fail on cheap foam boards due to poor surface adhesion.
The Angesen Solution: Our proprietary cementitious coating is engineered for maximum “mechanical grip.” With a bond strength reaching 1.0 MPa, it safely supports the heaviest porcelain slabs and natural stones without the risk of delamination.

II. 100% Structural Waterproofing

Waterproof to the Core: Unlike “water-resistant” gypsum boards, our XPS core has a closed-cell structure that cannot absorb water.
Health & Safety: By eliminating moisture penetration, Angesen® prevents the growth of mold and mildew, ensuring a healthy indoor environment for decades.

III. Extreme Efficiency (80% Lighter than Cement Board)

Save Your Back: A standard $1220 \times 2440 \text{ mm}$ board weighs only about $8\text{ kg}$ .
Fast Fabrication: Cut with a simple utility knife—no power tools, no hazardous dust.
Speed to Market: Install, seal, and start tiling in just 1 hour. Reduce your total labor costs by up to 50%.

Technical Specifications

Feature	Angesen XPS Backer Board	Cement Board	Gypsum Board (Drywall)
Weight	Ultralight (approx. 0.7 – 1.2 lbs/sqft)	Heavy (approx. 3 – 4 lbs/sqft)	Medium (approx. 1.8 – 2.2 lbs/sqft)
	Easily handled by a single person.	Requires two people to lift and install.	Fragile and prone to breakage.
Water Resistance	100% Waterproof	Moderate	Poor
	Closed-cell structure; prevents mold and rot.	Absorbs water, becomes heavier, and leaks.	Disintegrates and grows mold when damp.
Installation Speed	Very Fast	Slow	Moderate
	Cut with a utility knife; ready for tiling immediately.	Requires power cutters; creates heavy dust and mess.	Requires joint taping and drying time.
Insulation (R-Value)	Excellent (0.034 W/m·K)	Poor	Poor
	Acts as a thermal break for underfloor heating.	No insulation properties; high heat loss.	Low thermal resistance.
Compressive Strength	High (≥300 kPa)	Very High	Low
	Rigid substrate for heavy-duty floors.	Strong but brittle.	Susceptible to indentation.
Bond Strength	0.5 – 1.0 MPa	0.3 – 0.6 MPa	< 0.3 MPa
	Superior adhesion for large format tiles.	Standard adhesion levels.	Risk of tile delamination.

Professional Applications

One System, Infinite Applications

Shower & Spa Zones: Walls, floors, and ceilings.
Curbless Transitions: Perfectly compatible with our Pre-Sloped Shower Trays.
Custom Furniture: Easily build waterproof vanities, benches, and shelving.
Underfloor Heating: Provides a stable, insulated base that directs heat upwards, increasing energy efficiency.

Available Sizes & Customization

We support OEM/ODM for building material brands and wholesale distributors. specific model numbers (AGS366005 to AGS602480)

Standard Lengths: 1200mm / 1524mm/2440mm / 3000mm
Standard Widths: 600mm / 914mm / 1220mm
Thickness Options: 4mm – 100mm, ideal for floor, wall and ceiling for renovation and decoration.
- - 4mm-6mm: for floor, under heating (10PCS/CARTON)
  - 10mm – 12.5mm: Standard for wall stud partitioning. (5PCS/CARTON)
  - 20mm – 50mm: Perfect for building bathroom furniture, spa benches, and thick insulation. (5PCS/CARTON)

Installation Summary

1. Substrate: Ensure the surface is clean, dry, and load-bearing.

2. Fixing: Use AGS Stainless Steel Washers & Screws for mechanical fixing on studs, or cement-based flexible tile adhesive for solid walls.

3. Sealing: All joints must be sealed with AGS A5 Sealant and reinforced with alkali-resistant tape to maintain system integrity.

Stop Building with Outdated Materials. Start Installing with Angesen®.

Traditional cement boards are heavy, brittle, and prone to moisture wicking. Angesen® Tile Backer Boards redefine the industry standard. Featuring a 100% waterproof high-density XPS core reinforced with a polymer-modified cement coating and alkali-resistant fiberglass mesh, our boards provide the ultimate foundation for any tile or stone project.